PTFE Dry

LUBRICATION – PTFE Dry


Product Features:

Does not leave oil or grease residues (dry film) Very low coefficient of friction

Excellent adhesion

Prevents wear and gluing

For components subject to light loads and low speeds Weather resistant

Acts as a mold release agent


Applications:

Rails< p>Door locks Seat belts Windshield wipers Seat bars

Guarantee safe & secure checkout

special-val-04

Data sheet

ΕΙΔΟΣ SPRAY
ΛΙΠΑΝΣΗ

16 other products in the same category:


Product Features: User-friendly High dissolution properties

Optimum result due to high viscosity Non-conductive

Anti-corrosive

Innovative 360º spray system


Applications:

Removal of sealing materials in vehicles Engine parts

Cylinder heads Gearboxes Exhausts

Water and oil pumps Electric motors

Packaging : 12x500ML

Gasoline engines – Petrol System Protector

Product features:

Protects all components in contact with fuel Prevents high fuel consumption

Prevents poor engine performance

Ensures technical reliability and economic operation


Applications:

Suitable for all petrol engines in passenger cars with or without catalyst

Especially for direct injection petrol engines In cases of poor fuel quality< p>Add the contents of the bottle (300 ML) to the fuel tank Suitable for up to 60 L of petrol. The amount of fuel in the tank must be above the reserve indicator


Packaging: 12x300ML


Product Features:

Protects against electrolytic corrosion High thermal stability

Resistant to chemical and weather effects Resistant to water, salt, weak acids and bases Prevents wear and the gluing

Suitable for the assembly of ABS systems and lambda sensors Simplifies future removal


Applications:

ABS braking systems L-sensors Brake components Exhaust

Screwed connections , which are exposed to high temperatures

Industrial ovens


Packaging: 12x500ML


Packaging: 12x500ML


Product Features:

Effective cleaning of cooling systems.

Penetrates and removes sludge and corrosion residues.

Improves engine cooling performance.


Applications: Vehicles Generators Clark Machinery:

Gasoline and diesel engine cooling systems After a coolant change

Cleans the cooling system of any possible presence of engine oil

(e.g. after a gasket failure or engine repair)

Remove the coolant and fill with fresh water. Empty the contents of the bottle into the cooler and let the engine idle for about 30 minutes. Remove the mixture from the system. Wash the cooling system with clean water

Suitable for up to 10 L of coolant


Package: 12x250ML


Product Features: Water and Moisture Repellent Excellent Penetration Properties

Excellent Corrosion Prevention Properties Excellent Adhesion Properties Innovative 360º Spray System


Applications: Switches Batteries Cables

Power tools Plugs

Spark plugs


Package: 12x500ML


Product Features:

Improves the performance of engine oils

Increases the viscosity index, making the oil more viscous (thicker) at higher temperatures

Provides extended intervals oil change

Contributes to lower operating costs and increased service life due to reduced friction

Protects against oxidation

Prevents high oil consumption and loss


Applications: Vehicles Generators Clark Machinery:

Suitable for all petrol and diesel engines Add when the engine is at operating temperature Suitable for 4.5 liters of engine oil

Add the contents of the bottle (300 ML) to at least 1.5 liters of oil

< br>Packaging: 12x300ML


Product Features:

Anti-corrosion spray

Wax-based

Good water displacement Excellent penetration properties

Strong UV protection

< br> Applications:

Protection of materials located outdoors Vehicles

Industrial use Domestic use

Transatlantic transport (in presence of marine environment)


Packaging: 500ML


Product Features:

Excellent mechanical and thermal stability Good adhesion

Prevents wear and tear Resistant to weather effects Resistant to weak acids and bases Waterproof

< br> Applications:

Chain boxes subject to heavy loads Chains subject to heavy loads Conveyor belts


Package: 12x500ML


Product Features:

Anti-Corrosion Resin/Oil Base Water Repellent

Creates a Translucent Protective Film Odorless

High Performance

Good Crease Penetration


Applications:

For industrial applications Gaskets

Interior of car doors and other hollow parts of vehicles

Packaging: 500ML


Product Features:

Improves the performance of the particulate filter (DPF)

Prevents increased cleaning and maintenance costs Contributes to improved engine performance and reduced exhaust emissions< p
Applications: Vehicles Generators Clark Machinery:

Suitable for all Diesel Engines with Particulate Filter (DPF)

Driving in adverse conditions (e.g. driving short distances, in cities, in traffic jam) Add 300 ML to the oil tank (40-80 L capacity) Minimum fuel capacity in tank: 10 L

For best result repeat every three fuel fills

Do not use on vehicles equipped with OEM additive system that use AdBlue or similar


Package: 12x300ML


Product Features: Good penetrating properties Contains graphite and MoS2 Liquid repellent

Powerful spray

Innovative 360° spray system


Applications:

Screwed connections (screws, bolts and nuts) Gear wheels

Locks Tools Rails Chains

Gardening tools


Product Features:

Low coefficient of friction for minimal resistance

Retains excellent lubrication properties even under heavy loads Particularly suitable for high speed chains


< strong> Applications:

For all types of high-speed chains, such as bicycles,

motorcycles and mopeds

Waterproof Prevents wear

Weather resistant Reduces dirt adhesion


Packaging: 12x500ML


Product Features:

High thermal stability

Resistant to chemical and weather effects Preventive corrosion protection

Excellent adhesion

Prevents wear and tear Simplifies future removal


Applications: Brake components Exhaust

Screw connections, which are exposed to high temperatures Spark plug thread


Packaging: 12x500ML